Pokemon PokeWalker NEW Replacement Battery SONY CR2032
2mm × 20mm × 3.2mm
This battery is 100% Compatible w/ the "Nintendo Pokemon PokeWalker." To install the replacement battery will not erase the Pokémon inside the Pokewalker.
100% Brand New & 100% Authentic OEM Sony CR2032 Lithium Battery
5 Pieces in a pack
This battery is 100% Compatible w/ the "Nintendo Pokemon PokeWalker" This item is a must have as a Spare or To Replace the Battery On Your PokeWalker.
You will be required to use a Phillips-head screwdriver to remove the Plain or Belt Clip Backing in order to install the replacement battery. Important Note: Removing the battery will cause all steps taken and watts obtained to be cleared. The Pokémon inside will not be erased.
CR2032 battery (Lithium Coin) is a Lithium / Manganese Dioxide (Li/MnO2) in chemistry. The CR2032 has a nominal voltage of 3.0 Volts with typical capacity ranging from 220 ~ 240 mAh (to 2.0 volts) (Rated at 15K ohms at 21°C). The CR2032's energy density is 198 milliwatt hr/g, 653 milliwatt hr/cc with typical lithium content at 0.109 grams (0.0038 oz.). Shipping method is designated as Ground Transport Only.
Dimensions: 20mm diameter and 3.2mm thickness
CR2032 Cross Section (Internal View)
CR2032 Discharge Curve Chart
CR2032 Internal Restistance Chart
Comments
Post new comment